Symptom Chart

CAUTION: During diagnosis, a DTC associated with other system may be set when the ignition switch is turned "ON" position with connector(s) disconnected. On completion, confirm all systems for DTC(s). If DTC(s) are set, erase them all.

SYMPTOM CHART

SYMPTOM	INSPECTION PROCEDURE	REFERENCE
Communication with scan tool is not possible.	1	INSPECTION PROCEDURE 1: COMMUNICATION WITH SCAN TOOL IS NOT POSSIBLE
Power supply circuit.	2	INSPECTION PROCEDURE 2: POWER SUPPLY CIRCUIT. ; INSPECTION PROCEDURE 3: ODOMETER AND TRIP METER ARE NOT DISPLAYED. ; INSPECTION PROCEDURE 4: NO NEEDLE METERS WORK. ; INSPECTION PROCEDURE 5: WHEN THE IGNITION SWITCH IS TURNED TO THE ON POSITION, THE INDICATOR AND WARNING LIGHTS DO NOT ILLUMINATE
Odometer and trip meter are not displayed.	3
No needle meters work.	4
When the ignition switch is turned to the ON position, the indicator and warning lights do not illuminate.	5
Speedometer does not work (other meters work).	6	INSPECTION PROCEDURE 6: SPEEDOMETER DOES NOT WORK (OTHER METERS WORK) ; INSPECTION PROCEDURE 7: THE FUEL GAUGE NEEDLE MOVES EXCESSIVELY
The fuel gauge needle moves excessively.	7
Tachometer does not work (other meters work).	8	INSPECTION PROCEDURE 8: TACHOMETER DOES NOT WORK (OTHER METERS WORK)
Fuel gauge does not work (other meters work).	9	INSPECTION PROCEDURE 9: FUEL GAUGE DOES NOT WORK (OTHER METERS WORK)
Engine coolant temperature gauge does not work (other meters work).	10	INSPECTION PROCEDURE 10: ENGINE COOLANT TEMPERATURE GAUGE DOES NOT WORK (OTHER METERS WORK)
The fuel warning light does not illuminate or go out.	11	INSPECTION PROCEDURE 11: THE FUEL WARNING LIGHT DOES NOT ILLUMINATE OR GO OUT