Removal And Installation: Notes

WARNING:

Before removing the steering wheel assembly and driver's air bag module, refer to SERVICE PRECAUTIONS and AIR BAG MODULE AND CLOCK SPRING .
When removing and installing the steering wheel assembly, do not let it bump against the driver's air bag module.
After adjusting the steering angle, always perform calibration to make TCL/ASC-ECU learn the neutral position of the steering wheel sensor. (Refer to STEERING WHEEL SENSOR CALIBRATION ).

Fig 1: Exploded View Of Steering Wheel With Torque Specifications

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

Required Special Tool: