LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2012 >> Galant ES >> Repair and Diagnosis >> Electrical >> Gauges >> Combination Meter Assembly >> Combination Meters Diagnosis >> Data List Reference Table
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Data List Reference Table

The following items of the ECU input data can be read using scan tool MB991958.

DATA LIST REFERENCE

No. DATA LIST ITEM CHECK CONDITIONS NORMAL CONDITIONS
80 Speedometer Perform a test run of the vehicle. Vehicle speeds displayed on the speedometer and scan tool MB991958 are identical.
81 Speedometer (Target) Ignition switch: ON Speed meter and scan tool MB991958 displayed values agree with each other.
82 Speed sensor failure flag Ignition switch: ON OFF
83 Speed sensor confirmation flag Ignition switch: ON ON
84 Vehicle stop flag Ignition switch: ON ON
87 Tachometer Start the engine. Tachometer displayed value and scan tool MB991958 displayed value agree with each other.
89 Fuel gauge Ignition switch: ON Fuel gauge unit resistance value and scan tool MB991958 displayed value agree with each other.
8A Fuel gauge (Target) Ignition switch: ON Fuel gauge and scan tool MB991958 displayed values agree with each other.
8C Engine coolant temperature gauge Ignition switch: ON Engine coolant temperature and scan tool MB991958 displayed values agree with each other.
8E Coolant Temp. confirmation flag Ignition switch: ON ON
90 Odometer Ignition switch: ON Odometer displayed value and scan tool MB991958 displayed value agree with each other.
91 Rheostat Ignition switch: ON The brightness of the combination meter illumination changes.
A0 Door-ajar warning light All doors are closed OFF
Any door is open ON
A1 SRS warning light
  • Ignition switch: ON
  • After warning lamp pre-check
OFF
A2 ABS warning light
  • Ignition switch: ON
  • After warning lamp pre-check
OFF
A4 Charge indicator
  • Ignition switch: ON
  • After warning lamp pre-check
OFF
A5 Engine malfunction indicator
  • Ignition switch: ON
  • After warning lamp pre-check
OFF
A6 Low-fuel warning lamp - OFF
A7 Brake warning light
  • Ignition switch: ON
  • Parking brake: At release
OFF
  • Ignition switch: ON
  • Parking brake: OPERATION
ON
A8 Seat belt indicator
  • Ignition switch: ON
  • Driver's seatbelt: fastened
OFF
  • Ignition switch: ON
  • Driver's seatbelt: Not fastened
ON
A9 Cruise control indicator - OFF
AA ASC/TCL Operation indicator
  • Ignition switch: ON
  • After warning lamp pre-check
OFF
AB ASC/TCL OFF indicator - OFF
B1 Turn signal indicator (Right) Turn signal lamp: OFF or only left side lamp illuminates OFF
Turn signal lamp: Right side lamp illuminates ON
B2 Turn signal indicator (Left) Turn-signal lamp: OFF or only right side lamp illuminates OFF
Turn-signal lamp: Left side lamp illuminates ON
B3 Front fog light indicator Front fog lamp: OFF OFF
Front fog lamp: ON ON
B4 High beam indicator Headlamps: OFF or low-beam illuminates OFF
Headlamps: High-beam illuminates ON
C1 Shift indicator: P All shift position: Other than P position OFF
All shift position: P position ON
C2 Shift indicator: R All shift position: Other than R position OFF
All shift position: R position ON
C3 Shift indicator: N All shift position: Other than N position OFF
All shift position: N position ON
C4 Shift indicator: D All shift position: Other than D position OFF
All shift position: D position ON
C8 Shift indicator: 4 Perform a test run of the vehicle. (Auto mode) OFF
Perform a test run of the vehicle. (Manual mode) ON
C9 Shift indicator: 3 Perform a test run of the vehicle. (Auto mode) OFF
Perform a test run of the vehicle. (Manual mode) ON
CA Shift indicator: 2 Perform a test run of the vehicle. (Auto mode) OFF
Perform a test run of the vehicle. (Manual mode) ON