>> B << Synchronizer Ring Set No. 1 (Synchronizer Outer Ring No. 1, Synchronizer Middle Ring No. 1, Synchronizer Inner Ring No. 1) Installation

CAUTION: The rings of the synchronizer ring set No. 1 and No. 2 are dedicated to the 1st and 2nd gears. Be sure to install the right ring set to the right gear.

Fig 1: Identifying Synchronizer Outer Ring Of Synchronizer Ring Set No. 1

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

1. Make sure that the synchronizer outer ring of the synchronizer ring set No. 1 is as shown in the illustration.
   Fig 2: Locating Synchronizer Middle Ring Aligning Claws And 1st Gear Holes

   Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
2. Install the synchronizer ring set No. 1 aligning the claws of the synchronizer middle ring to the positioning holes in the 1st gear.
   NOTE: Apply gear oil to the sufficiently on the sliding surface