DIAGNOSTIC ITEM 13: Diagnose The Lines Between Joint Connector (CAN2) And Joint Connector (CAN3): Notes

WARNING: This page is about a different variant/trim than selected.

CAUTION: When servicing a CAN bus line, ground yourself by touching a metal object such as an unpainted water pipe. If you fail to do so, a component connected to the CAN bus line may be damaged.

Fig 1: CAN-C Communication Circuit (M/T)

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

Fig 2: CAN-C Communication Circuit (TC-SST)

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

Fig 3: Locating Connectors C-104, C-130 & C-127

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.