LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2012 >> Lancer Evolution GSR >> Repair and Diagnosis (Single Page) >> Electrical >> Gauges >> Combination Meter - Lancer Evolution >> On-Vehicle Service >> Service Reminder Function Set >> How To Set The Schedule
April 5, 2026: LEMON Manuals is launched! Read the announcement.

How To Set The Schedule

  1. Turn the ignition switch to the "OFF" position.
  2. By operating the meter information switch, the warning period is displayed on the multi information display.
  3. Press the meter information switch once for 1.2 seconds or longer.
  4. The service reminder indicator flashes.
  5. While the service reminder indicator flashes, press the meter information switch for 1.2 seconds or longer and 3 times consecutively.
  6. The service reminder indicator is turned ON, and the current schedule is displayed on the multi information display.
  7. While the current schedule is displayed, press the meter information switch for less than 1.2 seconds and 3 times consecutively.
  8. The multi information display is shifted to the schedule selection mode.
  9. When the meter information switch is pressed for less than 1.2 seconds, the schedule is shifted, and when the meter information switch is pressed for 1.2 seconds or longer, the displayed schedule is set.
    NOTE: For schedule, "JPN", "GCC", "EU" and "AUS" can also be selected. However, the setting shall be for "NAS" only.
  10. The schedule set in Step  9 is displayed for 3 seconds, and the warning period to the next time is displayed.
    SCHEDULE CHART

    Schedule Contents of schedule
    NAS 10 Elapsed time (month) Every 6 elapsed months
    Driving distance (miles) Every 7, 500 miles of driving distance
    Driving distance (km) Every 12, 000 km of driving distance
    NAS 11 Elapsed time (month) Every 3 elapsed months
    Driving distance (miles) Every 3, 750 miles of driving distance
    Driving distance (km) Every 6, 000 km of driving distance
    NAS 20 (initial setting) Elapsed time (month) Every 5 elapsed months
    Driving distance (miles) Every 5, 000 miles of driving distance
    Driving distance (km) Every 8, 000 km of driving distance
    NAS 21 Elapsed time (month) Every 4 elapsed months
    Driving distance (miles) Every 3, 750 miles of driving distance
    Driving distance (km) Every 6, 000 km of driving distance
    Optional INT The optional schedule can be set. (Only scan tool MB991958 can be set.)
    OFF Display Without function. "OFF" is displayed on the multi information display.
    Function OFF Without function (Only scan tool MB991958 can be set.)
    NOTE: For schedule, "JPN", "GCC/EXP", "EU" and "AUS" can also be selected. However, the setting shall be for "NAS" only.
scientia non olet · About LEMON Manuals