Special Tools

SPECIAL TOOLS REFERENCE

Tool	Tool number and name	Supersession	Application
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.	MB991958 Scan tool (M.U.T.-III sub assembly) MB991824 Vehicle communication interface (V.C.I.) MB991827 M.U.T.-III USB cable MB991910 M.U.T.-III main harness A (Vehicles with CAN communication system) MB991911 M.U.T.-III main harness B (Vehicles without CAN communication system) MB991914 M.U.T.-III main harness C (for Chrysler models only) MB991825 M.U.T.-III measurement adapter MB991826 M.U.T.-III trigger harness	MB991824-KIT NOTE: G: MB991826 M.U.T.-III Trigger Harness is not necessary when pushing V.C.I. ENTER key.	Measurement of turbocharger supercharging pressure CAUTION: For vehicles with CAN communication, use M.U.T.-III main harness A to send simulated vehicle speed. If you connect M.U.T.-III main harness B instead, the CAN communication does not function correctly.
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.	MB992274 Palm socket	-	Removal and installation of turbocharger compressor bracket
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.	MB991614 Angle gauge	General service tool	Installation of turbocharger assembly coupling bolt and nut
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.	MB991953 Oxygen sensor wrench	MB991953-01	Removal and installation of heated oxygen sensor
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.	MB992188 Fuel injection pipe wrench	MB992188-01	Removal and installation of No. 2 air temperature sensor