Service Specifications
WARNING: This page is about a different variant/trim than selected.
SERVICE SPECIFICATIONS TABLE
| Item | Standard value | Limit | ||
|---|---|---|---|---|
| Manifold distortion of the installation surface mm (in) | 0.15 (0.006) or less | 0.20 (0.008) | ||
| Intake charge pressure kPa (psi) | 68 - 122 (9.9 - 17.6) | - | ||
| Turbocharger wastegate actuator pressure kPa (psi) | 78 - 82 (11.4 - 11.8) | - | ||
| Turbocharger wastegate solenoid terminal resistance [at 20°C (68°F)] Ω | 29 - 35 | - | ||
| Exhaust manifold distortion of the installation surface mm (in) | 2.0L ENGINE Non-turbo, 2.4L ENGINE | - | 0.70 (0.028) | |
| 2.0L ENGINE Turbo | Cylinder head side | - | 0.70 (0.028) | |
| Turbocharger side | - | 0.40 (0.016) | ||