LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2012 >> Lancer Evolution GSR >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 59 (Headlight System - Lancer) >> On-Vehicle Service >> Headlight Removal And Installation >> Installation Service Point >> >> A << Headlight Control Unit Installation - Vehicles With Discharge Headlight
April 5, 2026: LEMON Manuals is launched! Read the announcement.

>> A << Headlight Control Unit Installation - Vehicles With Discharge Headlight

WARNING: This page is about a different variant/trim than selected.
  1. As shown in the illustration, doubly wrap the portion in the vinyl tape, from the headlight control unit connector root to the point where the harness separation is hidden.
    Fig 1: Identifying Headlight Control Unit Connector
    G05906415Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  2. Install the harness to the headlight assembly. At that time, fitting the harness into the resin washer is unnecessary.
    3. Fig 2: Identifying Fitting Of Headlight Assembly Harness
    G05906416Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals