LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2012 >> Lancer Evolution MR >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Manual Transaxle On-Vehicle Service - Lancer Evolution) >> Diagnosis <S-AWC (Super All Wheel Control)> >> Symptom Procedures >> INSPECTION PROCEDURE 1: Communication Between The Scan Tool And AWC-ECU Cannot Be Established >> Diagnostic Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Diagnostic Procedure

WARNING: This page is about a different variant/trim than selected.
  1. STEP 1. Scan tool CAN bus diagnostics 

    Using scan tool MB991958, diagnose the CAN bus lines.

    Q: Is the check result normal? 

    1. YES:  Check/repair the AWC-ECU power supply circuit. (Refer to INSPECTION PROCEDURE 3: AWC-ECU POWER SUPPLY CIRCUIT MALFUNCTION  .)
    2. NO:  Repair the CAN bus lines. (Refer to TROUBLESHOOTING .)
scientia non olet · About LEMON Manuals