<Except Vehicles With Steering Wheel Voice Control Switch>
WARNING: This page is about a different variant/trim than selected.
- Check the resistance and continuity between the AWC switch connector terminals.CONTINUITY SPECIFICATION
AWC selection switch terminal No. AWC selection switch Resistance value 2 - 4 (-) Approximately 270 Ω (+) Approximately 2.1 kΩ OFF Approximately 71 kΩ Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
CONTINUITY SPECIFICATIONTerminal No. Probe (Tester: Ω range) Continuity 1 - Present 5 + 1 + No 5 - - When other than above, replace the AWC switch.