Nominal Resistance Of The Fuel Level Sensor
WARNING: This page is about a different variant/trim than selected.
- Remove the fuel pump module (Refer to FUEL TANK < 2.0 L engine, 2.4 L engine > or FUEL TANK < 2.0L ENGINE TURBO > < RALLIART >).
- When float of the fuel level sensor is in stopper positions F and E, ensure that resistance between the fuel level sensor terminal and ground terminal is within the standard value.FUEL LEVEL SENSOR RESISTANCE STANDARD VALUE (FWD)
Float position Gauge resistance value (ohms) Stopper position "F" 13.0 ± 1.0 Stopper position "E" 120.0 ± 1.0 FUEL LEVEL SENSOR RESISTANCE STANDARD VALUE (AWD)Float position Gauge resistance value (ohms) Main Sub Stopper position "F" 6.5 ± 1.0 6.5 ± 1.0 Stopper position "E" 41.9 ± 1.0 78.1 ± 1.0 - When the float is moved slowly between stopper positions "F" and "E", ensure that the resistance is smoothly changing.