LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2012 >> Lancer Evolution MR >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Manual Transaxle Overhaul - Lancer Evolution) >> Output Shaft >> Disassembly And Assembly >> Assembly Service Points >> >>D<< 1ST-2ND Speed Synchronizer Sleeve Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

>>D<< 1ST-2ND Speed Synchronizer Sleeve Installation

WARNING: This page is about a different variant/trim than selected.
  1. Install the 1st-2nd speed synchronizer sleeve in the illustrated direction.
  2. Install the synchronizer outer ring, synchronizer cone and synchronizer inner ring.
  3. After installation, check that the 1st-2nd speed gears rotate smoothly.
    Fig 1: 1st-2nd Speed Synchronizer Sleeve Installation Direction
    G05394005Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals