LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2012 >> Lancer Evolution MR >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Manual Transaxle Overhaul - Lancer Evolution) >> Transaxle Case >> Disassembly And Assembly >> Assembly Service Points >> >>B<< Steel Ball Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

>>B<< Steel Ball Installation

WARNING: This page is about a different variant/trim than selected.
  1. Apply specified sealant to the periphery of the transaxle case where the steel ball is installed, then install the steel ball onto the transaxle case.

    Specified sealant: 3M™ STUD Locking No. 4710 or equivalent 

    Fig 1: Sealant Applying Area On Transaxle Case
    G05394048Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  2. Using special tool, MB990883, install the steel ball.
    Fig 2: Installing Steel Ball Using Special Tool MB990883
    G05394049Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals