>>H<< Oil Guide Installation

WARNING: This page is about a different variant/trim than selected.

CAUTION: Install the oil guide squarely.

Using special tool, MD999547, drive the oil guide all the way into place to the end face of the transaxle case.

Fig 1: Driving Oil Guide Into End Face Of Transaxle Case Using Special Tool MD999547 (Input Shaft Side)

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

Fig 2: Driving Oil Guide Into End Face Of Transaxle Case Using Special Tool MD999547 (Output Shaft Side)

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.