LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2012 >> Lancer Evolution MR >> Repair and Diagnosis >> Maintenance >> Procedures >> General - Lancer Evolution >> Maintenance Service >> 11. Manual Transaxle Oil (Check Oil Level And Condition/Change) >> Transaxle Oil Level Check
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Transaxle Oil Level Check

  1. Remove the engine room under cover front B assembly. (Refer to UNDER COVER .)
  2. Remove the oil filler plug and gasket.
    Fig 1: Identifying Oil Filler Plug & Oil Drain Plug
    G05392267Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  3. Check that the oil level is just below the lower edge of the oil filler plug hole.
  4. Check that the oil is not excessively foul and has moderate viscosity.
  5. Install the oil filler plug and new gasket, then tighten them to the specified torque.

    Tightening torque: 32 ± 2 N.m (24 ± 1 ft-lb) 

  6. Install the engine room under cover front B assembly. (Refer to UNDER COVER .)
    Fig 2: Identifying Oil Filler Plug & Gasket
    G05392268Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.