LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2012 >> Lancer SE >> Repair and Diagnosis (Single Page) >> Brakes >> Traction Control >> Active Stability Control System (ASC) - Lancer >> Diagnosis >> Diagnostic Trouble Code Procedures >> DTC U0125: G And Yaw Rate Sensor Message Time-Out Error/Message Error >> DTC Set Conditions
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC Set Conditions

This DTC is set when the ASC-ECU cannot receive the signal from the G and yaw rate sensor although there is no abnormality in ASC-ECU supply voltage.

NOTE: When an abnormality is present in the ASC-ECU supply voltage, DTC C2100 (low voltage error) is set, and DTC U0125 is not set.
scientia non olet · About LEMON Manuals