Customization Function
Using the ETACS system of scan tool MB991958, the following functions can be programmed. The programmed information is held even when the battery is disconnected.
| Adjustment item (scan tool display) | Adjustment item | Adjusting contents (scan tool display) | Adjusting contents |
|---|---|---|---|
| Hazard answerback | Hazard light blink time of keyless entry hazard light answerback function | Lock 0 Unlock 0 | No function |
| Lock 2 Unlock 0 | LOCK: Flash twice, UNLOCK: No flash | ||
| Lock 0 Unlock 1 | LOCK: No flash, UNLOCK: Flash once | ||
| Lock 2 Unlock 1 | LOCK: Flash twice, UNLOCK: Flash once | ||
| Lock 0 Unlock 2 | LOCK: No flash, UNLOCK: Flash twice | ||
| Lock 1 Unlock 0 | LOCK: Flashes once, UNLOCK: No flash | ||
| Lock 1 Unlock 2 | LOCK: Flashes once, UNLOCK: Flashes twice (Initial setting) | ||
| Horn answerback | Horn chirp by keyless entry system | Not sound horn | No horn answerback function |
| Lock any time | The horn sounds when the lock button of keyless entry transmitter is pressed once. | ||
| Lock (A/L ON) time | During daytime, while the lighting switch is in the AUTO position, the horn sounds once when the lock is pressed once. | ||
| W lock any time | The horn sounds when the lock button of keyless entry transmitter is pressed twice. (initial condition) | ||
| Door unlock mode | Adjustment of power door locks with selective unlocking | All doors | Without function: The first operation of keyless entry system unlocks all doors. |
| Dr door only | With function: The first operation of keyless entry system unlocks the driver's door only, and the second unlock operation within 2 seconds after that unlocks all doors. (initial condition) | ||
| Auto-relock time | Timer lock period adjustment | 180 sec. | 180 seconds |
| 120 sec. | 120 seconds | ||
| 60 sec. | 60 seconds | ||
| 30 sec. | 30 seconds (Initial setting) |