>> D << Synchronizer Ring Set No. 2 (Synchronizer Outer Ring No. 2, Synchronizer Middle Ring No. 2, Synchronizer Inner Ring No. 2) And 2ND Gear Installation

CAUTION: The rings of the synchronizer ring set No. 1 and No. 2 are dedicated to the 1st and 2nd gears. Be sure to install the right ring set to the right gear.

Fig 1: Identifying Synchronizer Outer Ring Of Synchronizer Ring Set No. 2

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

1. Make sure that the synchronizer outer ring of the synchronizer ring set No. 2 is as shown in the illustration.
   Fig 2: Locating 2nd Gear Aligning Claws Of Synchronizer Middle Ring

   Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
2. Install the synchronizer ring set No. 2 to the 2nd gear aligning the claws of the synchronizer middle ring to the positioning holes in the 2nd gear.
   NOTE: Apply gear oil to the sufficiently on the sliding surface