1 - 1 Visual Check Of Controller (Case)
WARNING: This page is about a different variant/trim than selected.
If any of the check items below are found, replace the controller.
INSPECTION CHART - 1 - 1 VISUAL CHECK OF CONTROLLER (CASE)
| Items to be checked | Why the controller should be replaced |
|---|---|
| Obvious deformation (warping, twisting, dents, nicks, chipped edges) of controller case | The printed circuit board or the element(s) may be cracked |
| Damaged connector (chipped or cracked plastics, or deformed terminal) | The damaged part(s) may cause poor connection or short circuit. |