Vehicles Without TC-SST
WARNING: This page is about a different variant/trim than selected.
- Park the vehicle on a level surface.
- Turn the ignition switch to the ON position.
- Turn the ignition key to the LOCK (OFF) position.CAUTION:
Before connecting or disconnecting scan tool, always turn the ignition switch to the LOCK (OFF) position.
- Check that the ignition key is in the LOCK (OFF) position, and then set scan tool.
- Turn the ignition switch to the ON position.
- On the Menu, select "System selection."
- On the "System selection," select "ABS/ASC/ASTC/WSS" in the "System table," and then click the "OK" button.
- In the "ABS/ASC/ASTC/WSS" field, select "Special function".
- In the "Special function," select "Learn sensor neutral position."
- Among the selected items, select "Learn G-sensor neutral position" and then press the "OK" button.
- "Learn G-sensor neutral position: Are you sure to execute the selected item?NOTE: Check the execution conditions." is displayed. Then, press the "OK" button.
- "Execute command: Executed" is displayed. Then, press the "OK" button.
- Among the selected items, select "Learn lateral G-sensor neutral position" and then press the "OK" button.
- "Learn lateral G-sensor neutral position: Are you sure to execute the selected item?NOTE: Check the execution conditions." is displayed. Then, press the "OK" button.
- "Execute command: Executed" is displayed. Then, press the "OK" button.
- The neutral point is learned.
- Turn the ignition key to the LOCK (OFF) position, and remove scan tool from the vehicle.