LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2013 >> Lancer ES, 4D Sedan, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 38 (Hands Free Module - Lancer Evolution) >> Methods For Pairing And Pairing Deletion With BLUETOOTH® Device Using MULTIVISION Display >> Display The Pairing List Screen >> Operation On The A/V Mode Screen
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Operation On The A/V Mode Screen

WARNING: This page is about a different variant/trim than selected.
  1. Press the (1) in the illustration.
    Fig 1: A/V Mode Screen Display - Mode Button
    G07667384Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  2. Display the A/V mode screen, and select "Bluetooth Audio."
    NOTE: When there are no active connections between the Bluetooth® Audio and the hands free module, "There are no active connections." is displayed.
    Fig 2: A/V Mode Screen Display
    G07667385Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  3. Select "1" in the illustration on the Bluetooth Audio screen.
    Fig 3: Bluetooth Audio Screen Display - Upper Button
    G07667386Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  4. Select "Pairing."
    Fig 4: Bluetooth Audio Screen Display - Pairing
    G07667387Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  5. The pairing list screen is displayed.
    Fig 5: Pairing List Screen Display
    G07667383Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.