DTC B1B0A: Passenger's (Front) Air Bag Module (1st Squib) System (Squib Circuit Open); DTC B1B0E: Passenger's (Front) Air Bag Module (2nd Squib) System (Squib Circuit Open): Notes

Fig 1: Passenger's (Front) Air Bag Module (Squib) Circuit Diagram

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

CAUTION:

• If DTC B1B0A <1st squib> or B1B0E <2nd squib> is set in the SRS-ECU, always diagnose the CAN main bus line.
• When DTC B1B0A is set in the following diagnosis, check the 1st squib circuit. When DTC B1B0E is set, check the 2nd squib circuit.