Freeze Frame Data Check

Data of when the diagnostic trouble code is determined is obtained, and the status of S-AWC is stored. By analyzing each data using the scan tool, troubleshooting can be carried out efficiently.

Display items of the freeze frame data are as follows.

DISPLAY ITEM LIST

DISPLAY ITEM CHART

Item No.	Item	Unit/display contents
1	Odometer	km
2	Ignition cycle	Count
4	Current trouble accumulative time	min
5	AWC control mode (for meter display)	TARMAC GRAVEL SNOW
6	ASC control mode	ASC ON ASC OFF ASC/BRC OFF ASC fail
7	AYC torque differential restriction direction (AYC request)	No restriction Restriction of right axle movement Restriction of left axle movement Restriction of lateral axle movement
8	Stoplight switch	ON OFF
9	Parking brake switch	ON OFF
10	ABS activation flag	ON OFF
11	Steering wheel sensor	deg
12	Accelerator opening angle	%
13	Wheel speed sensor <FL>	km/h
14	Wheel speed sensor <FR>	km/h
15	Wheel speed sensor <RL>	km/h
16	Wheel speed sensor <RR>	km/h
17	Master cylinder pressure sensor	MPa
18	Yaw rate sensor	deg/s
19	Lateral G-sensor	m/s²
20	Longitudinal G-sensor	m/s²
21	ACD target torque	Nm
22	AYC target torque	Nm
23	Brake control torque	Nm

NOTE: BRC: Brake Control System