LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2013 >> Lancer Evolution GSR >> Repair and Diagnosis (Single Page) >> Transmission >> Manual Trans >> Manual Transaxle Overhaul - Lancer Evolution >> Input Shaft >> Disassembly And Assembly >> Assembly Service Points >> >>F<< 5TH Speed Synchronizer Hub/5TH Synchronizer Sleeve Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

>>F<< 5TH Speed Synchronizer Hub/5TH Synchronizer Sleeve Installation

  1. Install the 5th speed synchronizer hub and synchronizer sleeve in the illustrated direction.
    Fig 1: 5th Speed Synchronizer Hub & Synchronizer Sleeve Installation Direction
    G05393984Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  2. Using the special tools, MD998812, MD998813 and MD998822, indicated below, install the 5th speed synchronizer hub and synchronizer sleeve.
    Fig 2: Installing 5th Speed Synchronizer Hub & Synchronizer Sleeve Using Special Tools, MD998812, MD998813 & MD998822
    G05393985Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  3. After installation, check that the 5th speed gear rotates smoothly.
scientia non olet · About LEMON Manuals