LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2013 >> Lancer Evolution GSR >> Repair and Diagnosis >> General Information >> Identification >> General Information - Lancer Evolution >> Maintenance Service >> 15. Reserve Tank Fluid (For Active Center Differential And Active Yaw Control System) (Check Fluid Level) >> Fluid Level Check >> When The Scan Tool Is Not Used
April 5, 2026: LEMON Manuals is launched! Read the announcement.

When The Scan Tool Is Not Used

  1. Remove the trunk room side trim lid on the right of the trunk room.
  2. If the vehicle has been run, leave it for 90 min. or more in an ordinary temperature {10 - 30°C (50 - 86°F)} to allow the accumulator internal pressure to drop.
    NOTE: If the ambient temperature is 10°C (50°F) or less, allow more time to leave the vehicle to stand idle.
  3. Check that the oil reservoir fluid level is in between MAX and MIN.
  4. If the fluid level is not in between MAX and MIN, fill the specified fluid.

    Specified fluid: DIAMOND ATF-SP III 

  5. Install the trunk room side trim lid.
Fig 1: Identifying Oil Reservoir
G05392277Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals