Data List Reference Table
CAUTION:
Driving tests always need two people: one driver and one observer.
DATA LIST REFERENCE
| Scan tool display | Item number | Inspection item | Inspection requirement | Normal condition | |
|---|---|---|---|---|---|
| Brake light switch | 74 | Stoplight switch (for stoplight circuit) | Ignition switch: "ON" | Brake pedal: Depressed | ON |
| Brake pedal: Released | OFF | ||||
| Cancel code | 57 | Cancel code | Ignition switch: "ON" | The cancel code, which set when the cruise control system was cancelled at the last time. | |
| Cancel switch | 75 | Cruise control switch ("CANCEL" switch) | Ignition switch: "ON" | "CANCEL" switch: Pressed | ON |
| "CANCEL" switch: Released | OFF | ||||
| Clutch switch | 78 | Clutch switch <M/T> | Ignition switch: "ON" | Clutch pedal: Depressed | ON |
| Clutch pedal: Released | OFF | ||||
| Cruise switch | 81 | Cruise control system operation | Cruise control system: active | ON | |
| Cruise control system: Inactive | OFF | ||||
| Main switch | 86 | Cruise control switch ("ON/OFF" switch) | Ignition switch: "ON" | "ON/OFF" switch: Pressed | ON |
| "ON/OFF" switch: Pressed again | OFF | ||||
| Neutral switch | 88 | Shift lever position <TC-SST> | Ignition switch: "ON" | Shift lever: "N", "P", "R" position | ON |
| Shift lever: Other than "N", "P", "R" position | OFF | ||||
| Normally closed brake switch | 89 | Stoplight switch (for Cruise control circuit) | Ignition switch: "ON" | Brake pedal: Depressed | ON |
| Brake pedal: Released | OFF | ||||
| Resume switch | 91 | Cruise control switch ("ACC/RES" switch) | Ignition switch: "ON" | "ACC/RES" switch: Pressed | ON |
| "ACC/RES" switch: Released | OFF | ||||
| Set switch | 92 | Cruise control switch ("COAST/SET" switch) | Ignition switch: "ON" | "COAST/SET" switch: Pressed | ON |
| "COAST/SET" switch: Released | OFF | ||||
| Vehicle speed | 04 | Vehicle speed signal | Road test the vehicle | The speedometer and scan tool MB991958 display the same value. | |