DTC B1B02: Driver's Air Bag Module (1st Squib) System (Squib Circuit Open); DTC B1B06: Driver's Air Bag Module (2nd Squib) System (Squib Circuit Open): Notes

Fig 1: Driver's Air Bag Module (Squib) Circuit Diagram

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

CAUTION:

• If DTC B1B02 <1st squib> or B1B06 <2nd squib> is set in the SRS-ECU, always diagnose the CAN main bus line.
• When DTC B1B02 is set in the following diagnosis, check the 1st squib circuit. When DTC B1B06 is set, check the 2nd squib circuit.