Removal And Installation: Notes
WARNING:
- Never attempt to disassemble or repair the knee air bag modules. If faulty, replace it.
- Do not drop the knee air bag modules or allow contact with water, grease or oil. Replace it if a dent, crack, deformation or rust is detected.
- Do not expose the knee air bag modules to temperatures over 93°C (200°F).
- After deployment of the air bag, replace the air bag module with a new one.
- Wear gloves and safety glasses when handling air bags that have already deployed.
- An undeployed knee air bag module should only be disposed of in accordance with the procedures (Refer to AIR BAG MODULE AND SEAT BELT PRE-TENSIONER DISPOSAL PROCEDURES ).
- When removing and installing the front passenger seat, be sure to carry out accuracy check occupant classification sensor after the seat has been installed in the vehicle (Refer to ON-VEHICLE SERVICE ).