Ignition Switch Continuity Check

With the ignition switch mounted to the vehicle, disconnect and check the ignition switch connection connector.

Fig 1: Ignition Switch Connector End View

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

CONTINUITY SPECIFICATION

Ignition key position	Terminal number	Normal condition
LOCK	1 - 2, 1 - 4, 1 - 5, 1 - 6	No continuity
ACC	1 - 6	Continuity exists (Less than 2 ohms)
ON	1 - 2 - 4 - 6	Continuity exists (Less than 2 ohms)
START	1 - 2 - 5	Continuity exists (Less than 2 ohms)