Inspection Procedure 4: The Navigation System Can Be Operated While The Vehicle Is Driven: Notes

WARNING: This page is about a different variant/trim than selected.

CAUTION:

Before replacing the multivision display, ensure that the power supply circuit, the ground circuit, and the communication circuit are normal. (Check that the voltage is 10 V or more.)

Fig 1: Multivision Display Communication Circuit Diagram

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

Fig 2: Locating Multivision Display Communication Connector C-04, C-13 & C-108

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.