Diagnostic Trouble Code Chart
WARNING: This page is about a different variant/trim than selected.
CAUTION:
During diagnosis, a DTC associated with other system may be set when the ignition switch is turned ON with connector(s) disconnected. On completion, confirm all systems for diagnostic trouble code(s). If diagnostic trouble code(s) are set, erase them all.
DIAGNOSTIC TROUBLE CODE CHART
| DTC No. | Item | |
|---|---|---|
| C1000 | Stoplight switch system | |
| C100A | FL | Wheel speed sensor system (faulty circuit) |
| C1015 | FR | |
| C1020 | RL | |
| C102B | RR | |
| C1011 | FL | Wheel speed sensor system (faulty signal) |
| C101C | FR | |
| C1027 | RL | |
| C1032 | RR | |
| C1014 | FL | Wheel speed sensor system (characteristics abnormality) |
| C101F | FR | |
| C102A | RL | |
| C1035 | RR | |
| C1078 | Tire turning malfunction | |
| C1219 | Steering wheel sensor system (faulty signal) | |
| C121A | Steering wheel sensor system (neutral learning abnormality) | |
| C123C | G and yaw rate sensor system (faulty signal) | |
| C1242 | G and yaw rate sensor system (abnormality of longitudinal G sensor output signal) | |
| C1610 | Electronic relay abnormality of AWC actuator power supply | |
| C1611 | AWC pressure sensor system (low voltage) | |
| C1612 | AWC pressure sensor system (high voltage) | |
| C1613 | AWC switch system (ON sticking) | |
| C1614 | Parking brake switch system (ON sticking) | |
| C1615 | Brake control prohibition request | |
| C1616 | Cranking signal system (ON sticking) | |
| C1617 | AWC CAN main data system (data not received) | |
| C1618 | AWC CAN local data system (data not received) | |
| C1619 | AYC current value (abnormal) | |
| C161A | AYC direction valve (right) system (output abnormality) | |
| C161B | AYC direction valve (left) system (output abnormality) | |
| C161C | ACD proportioning valve system (malfunction) | |
| C161D | Electric pump relay system (faulty circuit) | |
| C161E | Electric pump system | |
| C161F | AWC actuator protection 1 This is the code that is set when the control is suspended to protect AWC actuator, and not a malfunction. |
|
| C1620 | AYC control system (abnormal) | |
| C1621 | AWC actuator protection 2 This is the code that is set when the control is suspended to protect AWC actuator, and not a malfunction. |
|
| C1622 | ACD control system (abnormal) | |
| C1623 | Brake control system (abnormal) | |
| C1624 | AWC-ECU system (internal error) | |
| C1625 | AWC pressure sensor system (power supply voltage abnormality) | |
| C2100 | Battery voltage malfunction (low voltage) | |
| C2101 | Battery voltage malfunction (high voltage) | |
| C2114 | G and yaw rate sensor power supply (low voltage) | |
| C2115 | G and yaw rate sensor power supply (high voltage) | |
| C2203 | VIN not recorded | |
| C2204 | G and yaw rate sensor system (internal error) | |
| C2205 | Steering wheel sensor system (internal error) | |
| U0001 | Bus-off | |
| U0100 | Engine time-out error | |
| U0101 | TC-SST time-out error | |
| U0121 | ASC time-out error | |
| U0126 | Steering wheel sensor time-out error | |
| U0141 | ETACS time-out error | |
| U0401 | Engine data error | |
| U0428 | Steering wheel sensor data error | |
| U0431 | ETACS data error | |
| U1003 | Bus off (local CAN) | |
| U1415 | Coding incomplete/fail | |
| U1417 | Coding data malfunction | |
| U1425 | TC-SST data error | |
| U1426 | ASC data error | |
| U1427 | Wheel speed sensor data error | |
| U1428 | G and yaw rate sensor data error | |