LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2013 >> Lancer Evolution MR >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Manual Transaxle Overhaul - Lancer Evolution) >> Output Shaft >> Disassembly And Assembly >> Assembly Service Points >> >>C<< 1ST-2ND Speed Synchronizer Hub Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

>>C<< 1ST-2ND Speed Synchronizer Hub Installation

WARNING: This page is about a different variant/trim than selected.
  1. Install the 1st-2nd speed synchronizer hub in the illustrated direction.
    Fig 1: 1st-2nd Speed Synchronizer Hub Installation Direction
    G05394003Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  2. Using the special tools, MD998812, MD998814 and MD998824, indicated below, install the 1st-2nd speed synchronizer hub.
    Fig 2: Installing 1st-2nd Speed Synchronizer Hub Using Special Tools MD998812, MD998814 & MD998824
    G05394004Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals