<<C>> Driver's Air Bag Module Removal
CAUTION:
- Never use an electric tester to diagnose the air bag module circuit. Never attempt to disassemble the air bag module.
- Store the removed air bag module in a clean, dry place with the pad surface facing upward.
- When discarding the air bag module, deploy the air bag as specified in the service procedure. (Refer to AIR BAG MODULE AND SEAT BELT PRE-TENSIONER DISPOSAL PROCEDURE ).
- With the driver's air bag module mounting Torx screw, loosen the screw, but do not remove it.
Using the Torx wrench (T30), remove the driver's air bag module.