LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2013 >> Lancer GT, 4D Sedan, Standard Trans >> Repair and Diagnosis >> Brakes >> Traction Control >> Active Stability Control System (ASC) - Lancer >> Diagnosis >> Diagnostic Trouble Code Procedures >> DTC U0125: G And Yaw Rate Sensor Message Time-Out Error/Message Error >> DTC Set Conditions
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

DTC Set Conditions

This DTC is set when the ASC-ECU cannot receive the signal from the G and yaw rate sensor although there is no abnormality in ASC-ECU supply voltage.

NOTE: When an abnormality is present in the ASC-ECU supply voltage, DTC C2100 (low voltage error) is set, and DTC U0125 is not set.
scientia non olet · About LEMON Manuals