LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2013 >> Lancer SE >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (Power Steering - Lancer Evolution) >> Power Steering Hoses >> Removal And Installation >> Installation Service Points >> >>C<< Pressure Hose Assembly Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

>>C<< Pressure Hose Assembly Installation

WARNING: This page is about a different variant/trim than selected.

Install the pressure hose assembly plate with its marking located as shown in the illustration below.

Fig 1: Identifying Pressure Hose Assembly Plate Marking
G06677800Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals