1. Reminder Reset (Indicator Off)

WARNING: This page is about a different variant/trim than selected.

CAUTION:

Be careful not to execute "1 Reminder reset (Indicator off)" again after erasing the service reminder warning indicator which is currently output, because the next warning period will be cancelled.
If the next warning period is cancelled by mistake, the cancelled warning period can be restored by executing "5 Periodic reminder schedule set" to set a schedule different from the current one once, and then returning it to the previous schedule.

The service reminder warning indicator which is currently output can be cancelled.

NOTE: In addition to the operation of the scan tool MB991958, the service reminder warning indicator can be cancelled by operating the meter information switch on the combination meter. Refer to HOW TO OPERATE THE SCAN TOOL MB991958 .

On the "Service Reminder" screen, select "1 Reminder reset (Indicator off)."
NOTE: The screen indicates that the warning period (Nos. 1 and 2 in the data list) is "0 mile." and "0 month."
Press the "OK" button.

Fig 1: Screen Display - Service Reminder & 1 Reminder Reset (0 Mile)
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
The current warning indicator is cancelled, and the next warning period is displayed.
NOTE: The screen indicates that the warning period (Nos. 1 and 2 in the data list) is "7, 500 mile" and "6 month."

Fig 2: Screen Display - Service Reminder & 1 Reminder Reset (7500 Mile)
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.