LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2013 >> Lancer SE >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 59 (Front Axle - Lancer Evolution) >> Front Axle Hub Assembly >> Removal And Installation >> Installation Service Points >> >>A<< Knuckle And Strut Assembly Connection Bolt Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

>>A<< Knuckle And Strut Assembly Connection Bolt Installation

WARNING: This page is about a different variant/trim than selected.

Locate the knuckle and strut assembly upper connection bolt's marking position as shown in the illustration below and tighten it.

Fig 1: Locating Knuckle & Strut Assembly Upper Connection Bolt's Marking Position
G05394490Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.


Locate the knuckle and strut assembly upper connection bolt's marking position as shown in the illustration below and tighten it.

Fig 1: Locating Knuckle & Strut Assembly Upper Connection Bolt's Marking Position
G05394490Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.