LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2013 >> Outlander ES >> Repair and Diagnosis (Single Page) >> Restraints >> Passive Restraints >> Supplemental Restraint System (SRS) >> Air Bag Module(S) And Clock Spring >> Inspection >> Front Seatback Assembly With Side-Air Bag Module Check
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Front Seatback Assembly With Side-Air Bag Module Check

WARNING: Never attempt to measure the circuit resistance of the air bag module (squib), even if you are using the specified tester. If the circuit resistance is measured with a tester, accidental air bag deployment will result, and possible serious personal injury.
WARNING: If any improper part is found during the following inspection, replace the front seatback assembly with a new one. Dispose of the old one according to the specified procedure (Refer to UNDEPLOYED AIR BAG MODULE DISPOSAL  .
  1. Check the air bag module deployment section for dents or deformation.
  2. Check the connector for damage, the terminals for deformation, and the harness for binding.
    Fig 1: Identifying Side Airbag Module Deployment Section
    G07036199Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals