<< D >> Driver's Air Bag Module Assembly Removal

WARNING:

The air bag module must not be measured with such equipment as an ohmmeter.
The air bag module must not be disassembled.
The removed air bag module should be stored in a clean, dry place with the deployment surface facing up.

Using t-type long Torx wrench (T30), a Torx screw is loosened completely and removed < CANADA, Except vehicles with S-AWC >.
Loosen the Torx screw and remove the air bag module assembly < Vehicles with S-AWC (Except CANADA) >.

Fig 1: Identifying T-Type Long Torx Wrench (T30)
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.