Service Specifications
WARNING: This page is about a different car, the 2012 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.
SERVICE SPECIFICATIONS
| Item | Standard value | Limit | |
|---|---|---|---|
| Brake pedal height mm (in) | 221.8 - 227.8 (8.7 - 9.0) | - | |
| Dimension from the brake booster stud bolt end to the clevis hole center mm (in) | 75.8 - 80.2 (2.98 - 3.16) | - | |
| Brake pedal play mm (in) | 3 - 8 (0.12 - 0.31) | - | |
| Pedal-to-floor clearance when brake pedal is depressed mm (in) (Pedal depression force: approx. 500 N) | 80 (3.15) or more | - | |
| Fluid pressure generated by brake booster non-servo effect test kPa (psi) | Pedal depression force: 100 N | 0 - 600 (0 - 87.0) | - |
| Pedal depression force: 300 N | 1, 030 - 2, 220 (149.4 - 322.0) | - | |
| Fluid pressure generated by brake booster servo effect test kPa (psi) | Pedal depression force: 100 N | 6, 030 - 7, 780 (874.5 - 1, 128.4) | - |
| Pedal depression force: 300 N | 10, 370 - 11, 560 (1, 504.0 - 1, 676.6) | - | |
| Front disc brake | Pad thickness mm (in) | 10.0 (0.39) | 2.0 (0.08) |
| Brake disc thickness mm (in) | 26.0 (1.02) | 24.4 (0.96) | |
| Brake disc runout mm (in) | - | 0.06 (0.0024) | |
| Brake drag force N (lb) | 68 (15.3) or less | - | |
| Rear disc brake | Pad thickness mm (in) | 10.0 (0.39) | 2.0 (0.08) |
| Brake disc thickness mm (in) | 10.0 (0.39) | 8.4 (0.33) | |
| Brake disc runout mm (in) | - | 0.08 (0.0032) | |
| Brake drag force N (lb) | 68 (15.3) or less | - | |
| Brake pedal distortion mm (in) | 250 - 254 (9.8 - 10.0) | - | |