Column Switch (Switch Body Part) Continuity Check
WARNING: This page is about a different car, the 2012 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the lighting switch and the wiper/washer switch.
- Check that the continuity is present for the same terminal numbers (No. 2-11) of the column switch body connectors that remain on the steering column.
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
TERMINAL CONTINUITY REFERENCE CHARTColumn switch body Tester connection Specified condition - Lighting switch side connector
- Wiper/washer switch side connector
2 - 2
3 - 3
4 - 4
5 - 5
6 - 6
7 - 7
8 - 8
9 - 9
10 - 10
11 - 11Continuity exists (2 Ω or less)