>> A << Differential Case/Final Gear Installation

CAUTION: When attaching the final gear to the differential case, make sure the side with the bigger distance from the edge to the flange A face the differential case.

Distance from gear edge to flange A	Long
Distance from gear edge to flange B	Short

Fig 1: Identifying Final Gear To Differential Case

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

Install the final gear on the differential case, and tighten the fastening bolts to the specified torque.

Tightening torque: 130 N.m (96 ft-lb)

Fig 2: Installing Final Gear On Differential Case

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.