Check Of Freeze Frame Data: Notes
The freeze frame data can be checked by using the scan tool.
When detecting fault and storing the diagnostic trouble code, the ECU connected to CAN bus line obtains the data before the determination of the diagnostic trouble code and the data when the diagnostic trouble code is determined, and then stores the ECU status of that time. By analyzing each data from scan tool, the troubleshooting can be performed more efficiently. The displayed items are as the table below.
DISPLAY ITEM LIST
| Item No. | Item name | Content | Unit |
|---|---|---|---|
| 1 | Odometer | Total driving distance after the diagnostic trouble code is generated | mile |
| 2 | Ignition cycle | Number of times the ignition switch is turned "ON" or "LOCK (OFF)" after the past failure transition | Number of counts is displayed. |
| 4 | Accumulated minute | Cumulative time for current malfunction of diagnostic trouble code | min |
| 5 | Power supply voltage | Voltage of power supply when the diagnostic trouble code is generated | V |
| 13 | Stop light switch | Stop light switch condition when the diagnostic trouble code is generated: OFF/ON | - |
| 301 | ABS control | ABS control when the diagnostic trouble code is generated: OFF/ON | - |
| 401 | FL wheel speed sensor | Wheel speed (FL) when the diagnostic trouble code is generated | mph |
| 402 | FR wheel speed sensor | Wheel speed (FR) when the diagnostic trouble code is generated | mph |
| 403 | RL wheel speed sensor | Wheel speed (RL) when the diagnostic trouble code is generated | mph |
| 404 | RR wheel speed sensor | Wheel speed (RR) when the diagnostic trouble code is generated | mph |