LEMON Manuals
: Even more car manuals for everyone: 1960-2025
Home
>>
Mitsubishi
>>
2014
>>
Lancer ES, Standard Trans
>>
Repair and Diagnosis
>>
External Pages
>>
Different car
>>
Section 100 (MITSUBISHI Multi-Communication System (MMCS) - With Diagnostics)
>>
Diagnostic Trouble Code Procedures
>>
Trouble Symptom Chart
April 5, 2026:
LEMON Manuals is launched!
Read the announcement.
Trouble Symptom Chart
WARNING:
This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.
Inspection procedure No.
Trouble symptom
Reference
1
NO NAVIGATION SCREEN IS DISPLAYED.
Inspection Procedure 1: No navigation screen is displayed
2
NO SOUND IS HEARD.
Vehicles without audio amplifier
Inspection Procedure 2: No sound is heard. < Vehicles without audio amplifier >
VEHICLES WITH AUDIO AMPLIFIER
Inspection Procedure 2: No sound is heard. < Vehicles with audio amplifier >
3
THE SCREEN IS NOT NORMAL IN THE NAVIGATION MODE. (THE OWN VEHICLE MARK IS DISLOCATED.)
Inspection Procedure 3: The screen is not normal in the navigation mode. (The own vehicle mark is dislocated.)
4
THE RADIO BROADCASTING CAN NOT BE RECEIVED. < ANALOG RADIO >
Inspection Procedure 4: The radio broadcasting can not be received. < Analog radio >
5
GPS SIGNAL CAN NOT BE RECEIVED.
Inspection Procedure 5: GPS signal cannot be received
6
CD CANNOT BE PLAYED.
Inspection Procedure 6: CD cannot be played
7
SD CARD CANNOT BE READ.
Inspection Procedure 7: SD card cannot be read
8
POWER SUPPLY OR COMMUNICATION CIRCUIT TO THE CAN BOX UNIT IS DEFECTIVE.
Inspection Procedure 8: Power supply or communication circuit to the CAN box unit is defective