LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2014 >> Lancer ES, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 47 (Basic Brake System) >> Rear Disc Brake Assembly >> Disassembly And Reassembly >> Reassembly Service Points >> >> A << Piston Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

>> A << Piston Installation

WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.
  1. Use the special tool, rear disc brake piston driver (MB991621) as shown to turn the piston and install to the caliper body.
    Fig 1: Installing Rear Disc Brake Piston Driver
    G09667588Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  2. Set as shown so that the protrusion on the pad assembly rear face is engaged in the piston stopper groove.
    Fig 2: Identifying Stopper Groove And Protrusion
    G09667589Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals