How To Read Data List

Required Special Tools: 

• MB991958: Scan Tool (M.U.T.-III Sub Assembly)
  • MB991824: V.C.I.
  • MB991827: M.U.T.-III USB Cable
  • MB991910: M.U.T.-III Main Harness A

1. Connect scan tool MB991958 to the data link connector.
2. Turn the ignition switch to the "ON" position.
3. Select "System Select" from the start-up screen.
4. Select "From 2006 MY" of "Model Year." When the "Vehicle Information" is displayed, check the contents.
5. "Select "AUTO CRUISE" from "System List", and press the "OK" button.
   NOTE: When the "Loading Option Setup" list is displayed, check the applicable item.
6. Select the "MITSUBISHI."
7. Select the "Data List."
   NOTE: When the "Data List Reference Table" button is selected, the service data reference table is displayed, and the normal values can be checked.