Customization Function
By operating the ETACS system or MMCS of scan tool MB991958, the following functions can be programmed. The programmed information is held even when the battery is disconnected.
| Adjustment item (scan tool MB991958 display) | Adjustment item | Adjusting contents (scan tool MB991958 display) | Adjusting contents |
|---|---|---|---|
| Front wiper operation | Adjustment of the intermittent windshield wiper operation < vehicles without auto light > | Normal INT | Intermittent wiper interval is fixed to 4 seconds. |
| Variable INT | Intermittent wiper interval is calculated only by the wiper volume control. | ||
| Speed Sensitive | Intermittent wiper interval is calculated according to the intermittent wiper volume control and vehicle speed (initial condition). | ||
| Adjustment of the intermittent windshield wiper operation < vehicles with auto light > | Normal INT | Intermittent wiper interval is fixed to 4 seconds. | |
| Variable INT | Intermittent wiper interval is calculated only by the wiper volume control. | ||
| Speed Sensitive | Intermittent wiper interval is calculated according to the intermittent wiper volume control and vehicle speed. | ||
| Rain Sensitive | Intermittent wiper interval is calculated according to the intermittent wiper volume control and lighting control sensor (initial condition). | ||
| Front wiper washer | Disabling or enabling washer-linked wiper function | Only Washer | No function |
| Washer & Wiper | With function: Without delayed finishing wipe function (Initial condition) | ||
| Intelligent washer | With/without intelligent washer function | Disable | No function |
| Enable | With function (initial condition) |