LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2014 >> Lancer Evolution GSR >> Repair and Diagnosis (Single Page) >> External Pages >> Different variant/trim >> Section 25 (Wireless Control Module (WCM) - With Diagnostics - Lancer) >> TPMS Transmitter >> Removal And Installation >> Installation Service Points >> >> C << Tire Pressure Inflation/Nut RETIGHTENING
April 5, 2026: LEMON Manuals is launched! Read the announcement.

>> C << Tire Pressure Inflation/Nut RETIGHTENING

WARNING: This page is about a different variant/trim than selected.
CAUTION: After tire inflation, retighten the valve nut to 8. 0 ± 0. 5 N.m (71 ± 4 in-lb). This is necessary, because the TPMS transmitter is secured to the wheel with the valve nut and rubber grommet. The rubber grommet will be depressed by tire pressure or deteriorate over a period of time, which requires the valve nut to be retightened.

Inflate tire to required pressure, then retorque the valve nut to 8. 0 ± 0. 5 N.m (71 ± 4 in-lb).

scientia non olet · About LEMON Manuals