>> A << Clip/Shift Cable Connection (Transaxle Side)/Select Cable Connection (Transaxle Side) Installation

CAUTION: Securely insert the clip, shift cable, and select cable until they click into place.

After inserting the new clip into the cable bracket, insert the shift cable or select cable into the cable bracket.
NOTE: The clip can be installed either with its face side down or under side down.

Fig 1: Installing Shift Cable Into Cable Bracket
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
After assembling the clip of select cable as shown in the figure, connect the cables to the levers.

Fig 2: Identifying Select Cable And Clip
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.